Petrozavodskmash started manufacture of safety system hydroaccumulators for Akkuyu NPP

Petrozavodskmash
Фотоматериалы
Production
Akkuyu
19.01.2023

Petrozavodsk plant of AEM-Technologies, JSC (a member of Atomenergomash, machine engineering division of Rosatom Corporation, and Karelian Regional Branch of the Russian Engineering Union) has started the manufacture of hydroaccumulators of passive core flooding system (PCFS hydroaccumulator) for the fourth Power Unit, Akkuyu NPP (Turkey).

Shells for the assembly of hydroaccumulator bodies are manufactured in the assembly-and-welding facilities of Petrozavodskmash. Each PCFS hydroaccumulator consists of three shells and two bottoms. The shells are made of 60 mm thick stainless steel rolled sheets. In order to make one part, a 2.5 meters wide and 13 meters long blank is bended on a machine into a cylinder with the diameter of 4.3 meters. For the set of eight hydroaccumulators of PCFS, 24 shells shall be manufactured.

The passive core flooding system belongs to NPP passive safety systems and it is designed to remove the residual heat of the primary circuit coolant. The system comprises of 8 hydroaccumulators, each having a capacity of 120 cubic meters. An aqueous boric acid solution heated to a temperature of approximately 60 degrees is stored inside the hydroaccumulators at the plant during operation. When the pressure in the primary circuit falls below a certain level, the fluid is automatically fed into the reactor and the active core is cooled down.

Akkuyu NPP in Turkey is the first nuclear-industry-related project in the world being implemented pursuant to BOO (“build-own-operate”) approach. The project includes four Power Units equipped with Russian 3+ generation VVER-reactors with increased safety and advanced technical and economic characteristics. Design of the object is carried out by the Engineering Division of the Rosatom State Corporation. Each NPP Power Unit will have capacity of 1200 MW.

Russia is consistently developing international commercial and economic relations, focusing on cooperation with friendly countries. Despite the external constraints, the domestic economy is increasing the export opportunities and delivering goods, services and raw materials globally. Atomenergomash, JSC is substantially involved in this activity.

К списку новостей
Petrozavodskmash started manufacture of safety system hydroaccumulators for Akkuyu NPP

Читайте также:

Atommash has shipped equipment for the Turbine generator building of Akkuyu NPP, unit No. 2
Atommash has shipped equipment for the Turbine generator building of Akkuyu NPP, unit No. 2
Atommash has shipped equipment for the Turbine generator building of Akkuyu NPP, unit No. 2
The final stage of equipment manufacturing is hydraulic test during which the Modules of tube system were set at an angle on the special support system, large plugs with the dimension of 4х6 meters were installed and fastened with studs. Then each item was filled with purified desalinated water, pressure was built up to the maximum level of 7.5 atmospheres, after that the Modules were held under the pressure for an hour. During the test, the strength and tightness of the Modules of tube system were confirmed.
Petrozavodskmash has begun to ship reactor coolant pump housings for Tianwan NPS
Petrozavodskmash has begun to ship reactor coolant pump housings for Tianwan NPS
Petrozavodskmash has begun to ship reactor coolant pump housings for Tianwan NPS
In the course of manufacture, the RCP housings are subjected to all necessary kinds of inspection, particularly radiography, and a series of tests, of which hydraulic tests under overpressure (24.5 MPa) are of key importance. Upon approval as a result of all the inspections, the equipment is ready for shipment after being paint coated and preserved. Petrozavodskmash has shipped the first RCP housing for Tianwan NPS. In total, the scope of delivery comprises four RCP housings and spacers.
Atommash has completed work upon carrying out the threaded holes on the Reactor vessel for Tianwan NPS
Atommash has completed work upon carrying out the threaded holes on the Reactor vessel for Tianwan NPS
Atommash has completed work upon carrying out the threaded holes on the Reactor vessel for Tianwan NPS
Atommash Branch, AEM-Technologies, JSC in Volgodonsk (part of the machine-building division of Rosatom - Atomenergomash) carried out the cutting of threaded holes of the main joint on the Reactor vessel for the seventh power unit of the Tianwan NPS in China.